SP DRIVER 44 درايفر بدون بوق 250W RMS (سعر الوحدة)
شحن مجاني لجميع أنحاء العالم. ادفع بأقساط سهلة وبدون فوائد مع Klarna.
SUPER POWER AUDIODESIGNED IN ITALY
MMXXVI
250 watt RMS.
The driver alone.
A compression driver sold without the horn: 110 dB sensitivity, a 44.4 mm / 1.75" voice coil and 250 W RMS on a 25 mm (1") throat. Usable range 800 Hz – 10 kHz. Sold as a single unit, horn not included.
Power, measured not promised
PER DRIVER · RMS IS CONTINUOUS POWER, NOT BURST · NOMINAL 4 Ω
Why this driver
Sensitivity is what makes a horn system loud. At 110 dB this driver sits above the midrange without asking for huge power.
The coil measures 44.4 mm / 1.75" and is wound in CCAW (aluminium). That is the part that turns 250 W RMS into pressure and then has to survive it.
The throat is a standard 25 mm (1"). You choose the horn: flare, dispersion and look are your decision, not ours.
Rated from 800 Hz to 10 kHz on a 15 oz magnet assembly. A wide usable band for a front stage or an SPL wall.
Look at it closely
Full specifications and mounting data, straight from the 2026 factory sheet.
⇩ Open the manual (PDF)English · 2026 · opens in a new tab
What you receive
The price on this page is for one piece: the compression driver alone, with its 25 mm (1") threaded throat. Packed in the SP Audio box.
In the box: 1 × SP DRIVER 44 compression driver · SP Audio packaging.
Not included: the horn — this driver is sold without it — plus crossovers, capacitors, speaker cable and brackets, chosen for your car.
Technical specifications
| POWER & LOAD | |
|---|---|
| Rated power (RMS) | 250 W |
| Peak power (MAX) | 500 W |
| Minimum impedance | 4 ohm |
| ACOUSTIC | |
| Sensitivity | 110 dB |
| Frequency range | 800 Hz – 10 kHz |
| Throat diameter | 25 mm (1") |
| MOTOR & MATERIALS | |
| Voice coil diameter | 44.4 mm / 1.75" |
| Winding material | CCAW (aluminium) |
| Magnet | 15 oz |
| DIMENSIONS & PACKAGING | |
| Overall diameter | 101 mm (4") |
| Depth | 74 mm (3") |
| Net weight | 1.35 kg |
| Shipping weight (1 pc) | 1.5 kg |
| Shipping box (1 pc) | 11 × 11 × 8.7 cm |
| Sold as | Single unit · horn not included |
MANUFACTURER’S LABORATORY DATA · PEAK OR “BURST” FIGURES USED IN SOME MARKETS ARE NOT RMS AND ARE NOT LISTED
Complete the system
Before you install it
- It always needs a crossover. Never full range. A compression driver wired straight to the amplifier does not survive. Use a crossover, or at the very least a capacitor in series.
- Do not cross below 800 Hz. 800 Hz is the lowest frequency this driver is rated for. Going under it, at any power, is the fastest way to tear the diaphragm.
- Do not go below 4 ohm per channel. 4 ohm is the minimum load. Two drivers in parallel on one channel give 2 ohm: most amplifiers will heat up or go into protection.
- Add a horn before you play it. This driver ships without one. Mount it on a 25 mm (1") horn, aim it at the listener, then bring the gain up slowly. Clipping kills compression drivers far more often than power does.
Questions installers ask
spaudio@spaudio.it · +39 340 807 8778
Accepted payment methods
Visa · Mastercard · Maestro · American Express · PayPal · Apple Pay · Google Pay · Shop Pay · Klarna
SP Audio — Super Power Audio. Designed in Italy by Audiocar Import & Export SRLS, Milano, official SP Audio distributor for Europe.