SPTW-49 / 150 WATT RMS (سعر الوحدة)
شحن مجاني لجميع أنحاء العالم. ادفع بأقساط سهلة وبدون فوائد مع Klarna.
SUPER POWER AUDIODESIGNED IN ITALY
MMXXVI
150 watt RMS.
All the top end, none of the guesswork.
A 4-inch aluminium tweeter built for pressure: 105 dB sensitivity, a 37 mm KCCAW voice coil, 150 W RMS and 300 W peak on a nominal 4 ohm load. Sold singly, one piece per price.
Power, measured not promised
PER TWEETER · RMS IS CONTINUOUS POWER, NOT BURST · NOMINAL 4 Ω
Why this tweeter
The number that matters is the continuous one: 150 W RMS on a nominal 4 ohm load. The 300 W MAX figure is a peak, it is not a working power and we do not sell it as one.
Sensitivity is what you actually hear. At 105 dB SPL 1W/1M this tweeter sits on top of the midrange and the sub without asking the amplifier for much.
A 37 mm KCCAW voice coil. That is the part that turns watts into pressure, and it is the part that burns if you run a tweeter full range.
The price on this page is for one tweeter. Build a two-way front with two of them, or add a single one to a system that is already there — you decide, without paying for a pair.
Look at it closely
Full specifications and mounting data, straight from the 2026 factory sheet.
⇩ Open the manual (PDF)English · 2026 edition · opens in a new tab
What you receive
The price on this page is for one piece. If you want a full front stage, order two: they ship from the same stock, so left and right match. Packed in the SP Audio box.
In the box: 1 × SPTW-49 4-inch aluminium tweeter · mounting hardware · SP Audio packaging.
Not included: crossovers, capacitors, speaker cable and brackets — installation materials, chosen for your car.
Technical specifications
| POWER & LOAD | |
|---|---|
| Rated power (RMS) | 150 W |
| Peak power (MAX) | 300 W |
| Rated impedance | 4 ohm |
| ACOUSTIC | |
| Sensitivity | 105 dB SPL 1W/1M |
| Upper frequency limit | 20 kHz |
| MOTOR & MATERIALS | |
| Voice coil diameter | 37 mm |
| Winding material | KCCAW |
| DIMENSIONS & PACKAGING | |
| Sold as | Single unit (1 piece) |
MANUFACTURER’S LABORATORY DATA · PEAK OR “BURST” FIGURES USED IN SOME MARKETS ARE NOT RMS AND ARE NOT LISTED
Complete the system
Before you install it
- Never connect it straight to the amplifier. A tweeter always needs a crossover, or at the very least a capacitor in series. Full range on a tweeter destroys the voice coil in seconds.
- Cross it high, not low. This is a super tweeter: it plays the top of the range and nothing else. The mid-bass belongs to the midrange, the bass to the subwoofer.
- Do not go below 4 ohm per channel. This page is one piece. Two of them in parallel on the same channel give 2 ohm: most amplifiers will heat up or go into protection. One tweeter per channel is the safe way.
- Aim it, and set the gain low. A tweeter like this is directional, so point it at the listener; then bring the level up slowly. Clipping kills tweeters far more often than power does.
Questions installers ask
spaudio@spaudio.it · +39 340 807 8778
Accepted payment methods
Visa · Mastercard · Maestro · American Express · PayPal · Apple Pay · Google Pay · Shop Pay · Klarna
SP Audio — Super Power Audio. Designed in Italy by Audiocar Import & Export SRLS, Milano, official SP Audio distributor for Europe.