SP EM 6.5KIT 2 WAY 2 WOOFER +2 TW + 2 CROSS 200W RMS (KIT PRICE)

قیمت فروش€124,00 قیمت معمولی€248,00
ذخیره €124,00
✅
ReadyShips in 24/48 h from Italy

Pay in easy, interest-free installments with Klarna.


SP Audio - Super Power AudioSUPER POWER AUDIO
DESIGNED IN ITALY
MMXXVI
2-way kit · 96 dB · high efficiency · 6.5 inch

200 watt RMS.
The loud one.

The high efficiency version of the 6.5" component kit: two 165 mm midranges at 96 dB, two aluminium bullet super tweeters at 98 dB and two dedicated crossovers. 200 W RMS for the kit, 4 ohm. Ten decibels more sensitive than the standard kit — it plays loud with far less amplifier. The tweeter mounts high on the pillar and the stage rises with it, which a coaxial cannot do.

SP EM 6.5 KIT high efficiency 2-way component system: 6.5 inch midranges, aluminium bullet tweeters and crossovers
200WRMS · KIT · 4 Ω
400WMAX · PEAK
96dBSPL 1W/1M · MIDRANGE
🔒 Secure checkout · SSL & PCI DSS↩ 14 days to change your mind (EU)✓ Invoice from an Italian company✓ Data from the 2026 factory manual
✓ ITALIAN DESIGN✓ 4 OHM✓ KIT PRICE✓ HIGH EFFICIENCY 96 DB✓ CROSSOVERS INCLUDED
01

Power, measured not promised

RMS · 4 Ω
200 W
MAX · PEAK
400 W

FIGURES FOR THE COMPLETE KIT · 100 W RMS PER MIDRANGE, 100 W RMS PER TWEETER · RMS IS CONTINUOUS POWER, NOT BURST · NOMINAL 4 Ω, MINIMUM 3.2 Ω

02

Why this kit

96 dB: it plays loud on little power

Three decibels of sensitivity are worth double the amplifier. At 96 dB on the midrange and 98 dB on the tweeter, a modest 2-channel amp already fills the car.

The tweeter goes where your ears are

In a component system the tweeter is a separate piece. Mount it high — pillar, mirror triangle, top of the door — and the whole stage lifts to the windscreen. A coaxial keeps the highs down by your knees and can never do this.

The crossovers are in the box

Two dedicated passive crossovers, one per side. They send the low frequencies to the midrange and the highs to the tweeter, so neither driver gets what it cannot handle. Nothing to buy, nothing to calculate.

A tweeter that starts at 2 kHz

The aluminium bullet tweeter runs from 2 kHz to 20 kHz and takes 100 W RMS — as much as the midrange. It does not run out of headroom when the volume goes up.

“Continuous RMS only. No peak, no burst, no marketing watts.”
03

Look at it closely

SP EM 6.5 KIT midrange seen from the front: rigid cone and orange phase plug
01 · the midrangeRigid cone with the orange phase plug in the centre, 30.5 mm voice coil, 96 dB, 100 Hz to 10 kHz.
SP EM 6.5 KIT seen from the back: reinforced basket
02 · the basketReinforced basket in the signature SP Audio orange and black. Nominal 4 ohm, minimum 3.2 ohm.
Free shippingDispatched from Italy in 24–48 working hoursWarranty on manufacturing defectsFree technical support from Italy
FACTORY MANUAL & SPECIFICATION SHEET

Full specifications, crossover data and mounting information, straight from the 2026 factory sheet.

⇩  Open the manual (PDF)

English · 2026 edition · opens in a new tab

04

What you receive

Six pieces. The whole front stage, both sides.

This page is the price of the complete kit, not of a single driver: everything for the left and the right side of the car, from the same production batch.

In the box: 2 × 6.5"/165 mm midrange driver · 2 × aluminium bullet super tweeter · 2 × dedicated passive crossover · SP Audio packaging.
Not included: grilles, speaker cable, adapter rings and tweeter mounting cups — installation materials, chosen for your car.

SP EM 6.5 KIT: midranges, tweeters and crossovers together
05

Technical specifications

POWER & LOAD
Kit power handling (RMS) 200 W
Kit power handling (MAX) 400 W
Midrange power (RMS) 100 W
Tweeter power (RMS) 100 W
Rated impedance 4 ohm
Minimum impedance 3.2 ohm
ACOUSTIC
System type 2 way component set
Nominal diameter 165 mm (6.5")
Sensitivity midrange 96 dB SPL 1W/1M
Sensitivity tweeter 98 dB SPL 1W/1M
Frequency range midrange 100 Hz - 10 kHz
Frequency range tweeter 2 kHz - 20 kHz
MOTOR & MATERIALS
Voice coil diameter (midrange) 30.5 mm
Voice coil diameter (tweeter) 29 mm (1.2")
Components High-efficiency midrange + aluminium bullet super tweeter + dedicated crossover
Design SP Audio orange & black, reinforced basket
Sold as Complete kit (2 midranges + 2 tweeters + 2 crossovers)

MANUFACTURER’S LABORATORY DATA · PEAK OR “BURST” FIGURES USED IN SOME MARKETS ARE NOT RMS AND ARE NOT LISTED

06

Complete the system

07

Before you install it

  • The tweeter never goes straight on the amplifier. It must be wired through its crossover. Sending it full range is the fastest way to burn it, and it is not a warranty case.
  • Put the crossover where you can reach it. Behind the door panel or under the seat, but reachable: you will want to change the tweeter level once the car is together. Keep it dry and away from the window mechanism.
  • High-pass the midrange. Cut below 100 Hz and leave the bass to a subwoofer: this is a midrange, not a woofer.
  • Do not go below 4 ohm per channel. One crossover per channel. Two on the same channel give 2 ohm and most amplifiers will heat up or go into protection.
08

Questions installers ask

How much power does the SP EM 6.5 KIT handle?200 W RMS and 400 W peak for the complete kit: 100 W RMS on each midrange and 100 W RMS on each tweeter.
Exactly what do I receive?Six pieces: 2 midranges of 6.5"/165 mm, 2 aluminium bullet super tweeters and 2 passive crossovers. The price on this page is for the whole kit.
What is the difference from the SP 6.5C KIT?Sensitivity and power. This one is 96 dB on the midrange and 98 dB on the tweeter, 200 W RMS for the kit; the SP 6.5C KIT is 86 dB and 180 W RMS. This one plays much louder on the same amplifier.
What amplifier does it need?4 ohm nominal, 3.2 ohm minimum. A two-channel amplifier delivering around 200 W RMS at 4 ohm per channel drives the pair through the crossovers.
Do I need to buy crossovers separately?No. The two passive crossovers are included in the kit, one per side.
Free technical support from Italy. Write or call and a person answers, with the real data of the product sheets. Tell us what you want to build — power, crossover points, door or kick panel — and we will help you match it.
spaudio@spaudio.it · +39 340 807 8778

Accepted payment methods
Visa · Mastercard · Maestro · American Express · PayPal · Apple Pay · Google Pay · Shop Pay · Klarna

SP Audio — Super Power Audio. Designed in Italy by Audiocar Import & Export SRLS, Milano, official SP Audio distributor for Europe.