SP TW 06 Silver Bullet Tweeter 80W RMS
Free shipping worldwide. Pay in easy, interest-free installments with Klarna.
SUPER POWER AUDIODESIGNED IN ITALY
MMXXVI
111.2 dB.
One tweeter, all the highs.
The silver bullet: a die-cast aluminium horn tweeter with 111.2 dB of sensitivity and 80 W RMS. It is sold one at a time, so you buy exactly the number your build needs — two for the front, four for a wall.
Power, measured not promised
PER TWEETER · RMS IS CONTINUOUS POWER, NOT BURST · 4 Ω MINIMUM · ALWAYS DRIVEN THROUGH A CROSSOVER
Why this tweeter
The highest sensitivity in the SP Audio tweeter range. A horn concentrates the energy instead of spreading it, so a couple of watts are already loud.
Not plastic. Cast aluminium keeps the horn rigid and pulls heat away from the motor — which is what keeps the sound clean when the system is running hard.
Buy exactly what your build needs: two for a front stage, four or six for a competition install. No forced pairs.
Continuous power, not a burst figure. On a tweeter this efficient you will almost never need all of it.
Look at it closely
Full specifications and mounting data, straight from the 2026 factory sheet.
⇩ Open the manual (PDF)English · 2026 edition · opens in a new tab
What you receive
The price on this page is for a single piece. If you want a stereo front, add two to the cart; for a bigger install, as many as your project needs. Packed in the SP Audio box.
In the box: 1 × SP TW 06 silver bullet tweeter · SP Audio packaging.
Not included: crossovers or series capacitors, speaker cable and mounting hardware for your car — a tweeter must never be connected without a filter, see section 07.
Technical specifications
| POWER & LOAD | |
|---|---|
| Rated power (RMS) | 80 W |
| Peak power (MAX) | 150 W |
| Minimum impedance | 4 ohm |
| ACOUSTIC | |
| Sensitivity | 111.2 dB SPL 1W/1M |
| Upper frequency limit | 20 kHz |
| MATERIALS | |
| Frame | Die-cast aluminium |
| Sold as | Single unit (1 piece) |
MANUFACTURER’S LABORATORY DATA · PEAK OR “BURST” FIGURES USED IN SOME MARKETS ARE NOT RMS AND ARE NOT LISTED
Complete the system
Before you install it
- Never connect a tweeter without a filter. A crossover, or at the very least a capacitor in series: full range straight from the amplifier will destroy the voice coil in seconds. This is not optional.
- Cross it high and check the manual. A horn tweeter is meant for the top of the band only. Use the minimum crossover frequency printed in the factory sheet and never go below it — and if you are not sure, write to us before you power it up.
- Do not go below 4 ohm. Four ohm is the minimum impedance of this tweeter: wiring two in parallel on one channel takes the amplifier to 2 ohm and it will heat up or go into protection.
- 111.2 dB means you need less gain, not more. This is the most efficient tweeter we sell: attenuate it, aim it slightly off-axis and stop before the amplifier clips. Clipping kills tweeters, power rarely does.
Questions installers ask
spaudio@spaudio.it · +39 340 807 8778
Accepted payment methods
Visa · Mastercard · Maestro · American Express · PayPal · Apple Pay · Google Pay · Shop Pay · Klarna
SP Audio — Super Power Audio. Designed in Italy by Audiocar Import & Export SRLS, Milano, official SP Audio distributor for Europe.