SP 6.5 KIT . کیت کامپوننت دوراهه 2 وودفر +2 تیوتر + 2 کراساور 180W RMS (قیمت کیت)
ارسال رایگان به سراسر جهان. پرداخت در ۳ قسط بدون بهره با Klarna.
SUPER POWER AUDIODESIGNED IN ITALY
MMXXVI
180 watt RMS.
Six pieces, one front stage.
Two 6.5"/165 mm midranges with a black paper cone, two 28 mm silk dome tweeters on a neodymium magnet, two crossovers cut at 3 kHz, 12 dB/oct. 180 W RMS for the kit, 4 ohm. The tweeter goes up on the pillar and the singer moves to the windscreen — something a coaxial cannot do.
Power, measured not promised
FIGURES FOR THE COMPLETE KIT · 100 W RMS PER MIDRANGE, 80 W RMS PER TWEETER · RMS IS CONTINUOUS POWER, NOT BURST · NOMINAL 4 Ω, MINIMUM 3.2 Ω
Why a component kit
In a component system the tweeter is a separate piece. Mount it high — pillar, mirror triangle, top of the door — and the whole stage lifts to the windscreen. A coaxial keeps the highs down by your knees and can never do this.
28 mm silk dome on a neodymium magnet: 95 dB, up to 20 kHz, with the softer top end that silk gives. It is the tweeter you can listen to for three hours without the cymbals becoming tiring.
Two passive crossovers cut at 3 kHz with a 12 dB/oct slope, one per side. They keep the low frequencies away from the tweeter and the top end away from the midrange. Nothing to buy, nothing to calculate.
165 mm nominal, 4 ohm, black paper cone: they replace the factory door speakers in most cars.
Look at it closely
Full specifications, crossover data and mounting information, straight from the 2026 factory sheet.
⇩ Open the manual (PDF)English · 2026 edition · opens in a new tab
What you receive
This page is the price of the complete kit, not of a single driver: everything for the left and the right side of the car, from the same production batch.
In the box: 2 × 6.5"/165 mm midrange driver · 2 × 28 mm silk dome tweeter · 2 × passive crossover, 3 kHz / 12 dB per octave · SP Audio packaging.
Not included: grilles, speaker cable, adapter rings and tweeter mounting cups — installation materials, chosen for your car.
Technical specifications
| POWER & LOAD | |
|---|---|
| Kit power handling (RMS) | 180 W |
| Kit power handling (MAX) | 360 W |
| Midrange power (RMS) | 100 W |
| Tweeter power (RMS) | 80 W |
| Rated impedance | 4 ohm |
| Minimum impedance | 3.2 ohm |
| ACOUSTIC | |
| System type | 2 way component set |
| Nominal diameter | 165 mm (6.5") |
| Sensitivity midrange | 86 dB SPL 1W/1M |
| Sensitivity tweeter | 95 dB SPL 1W/1M |
| Frequency range midrange | 100 Hz - 10 kHz |
| Frequency range tweeter | 65 Hz - 20 kHz |
| Crossover | 3 kHz, 12 dB/oct |
| MOTOR & MATERIALS | |
| Cone | 6.5" black paper |
| Tweeter | ø 28 mm silk dome |
| Tweeter magnet | Neodymium, 85×32×12 mm (10.31 oz) |
| Voice coil diameter (midrange) | 25.5 mm / 1" |
| Voice coil diameter (tweeter) | 29 mm / 1.2" |
| Design | SP Audio orange & black, reinforced basket |
| Sold as | Complete kit (2 midranges + 2 tweeters + 2 crossovers) |
MANUFACTURER’S LABORATORY DATA · PEAK OR “BURST” FIGURES USED IN SOME MARKETS ARE NOT RMS AND ARE NOT LISTED
Complete the system
Before you install it
- The tweeter never goes straight on the amplifier. It must be wired through its crossover. Sending it full range is the fastest way to burn it, and it is not a warranty case.
- Put the crossover where you can reach it. Behind the door panel or under the seat, but reachable: you will want to change the tweeter level once the car is together. Keep it dry and away from the window mechanism.
- High-pass the midrange. Cut below 100 Hz and leave the bass to a subwoofer: this is a midrange, not a woofer.
- Do not go below 4 ohm per channel. One crossover per channel. Two on the same channel give 2 ohm and most amplifiers will heat up or go into protection.
Questions installers ask
spaudio@spaudio.it · +39 340 807 8778
Accepted payment methods
Visa · Mastercard · Maestro · American Express · PayPal · Apple Pay · Google Pay · Shop Pay · Klarna
SP Audio — Super Power Audio. Designed in Italy by Audiocar Import & Export SRLS, Milano, official SP Audio distributor for Europe.
