SP DRIVER 47 COMPLETE DRIVER WITH HORN 200W RMS (PAIR PRICE)
Pay in easy, interest-free installments with Klarna.
SUPER POWER AUDIODESIGNED IN ITALY
MMXXVI
200 watt RMS.
The horn is in the box.
A complete compression driver, horn included: 114 dB sensitivity, a 34.4 mm / 1.35" voice coil and 200 W RMS on a 30 mm (1.2") throat. Usable range 800 Hz – 20 kHz. Magnet: 13 oz. Sold as a pair, matched from the same production batch.
Power, measured not promised
PER DRIVER · RMS IS CONTINUOUS POWER, NOT BURST · NOMINAL 4 Ω
Why this driver
The 13 oz motor keeps the voice coil under control at high level, session after session. Sensitivity stays at 114 dB and it takes 200 W RMS.
Sensitivity is what makes a horn loud. At 114 dB this driver stays above the midrange and the sub without asking for huge power.
The horn comes in the box, already matched to the 30 mm (1.2") throat. No guessing about flare or coupling: it arrives as one working assembly.
The coil measures 34.4 mm / 1.35" and is wound in CCAW (aluminium). That is the part that turns 200 W RMS into pressure and then has to survive it.
Look at it closely
Full specifications and mounting data, straight from the 2026 factory sheet.
⇩ Open the manual (PDF)English · 2026 · opens in a new tab
What you receive
The price on this page is for a pair: two drivers with their horns, from the same production batch, so the two sides of the car are matched. Packed in the SP Audio box.
In the box: 2 × SP DRIVER 47 compression driver with horn · SP Audio packaging.
Not included: crossovers, capacitors, speaker cable and brackets — installation materials, chosen for your car.
Technical specifications
| POWER & LOAD | |
|---|---|
| Rated power (RMS) | 200 W |
| Peak power (MAX) | 400 W |
| Minimum impedance | 4 ohm |
| ACOUSTIC | |
| Sensitivity | 114 dB SPL 1W/1M |
| Frequency range | 800 Hz – 20 kHz |
| Throat diameter | 30 mm (1.2") |
| MOTOR & MATERIALS | |
| Voice coil diameter | 34.4 mm / 1.35" |
| Winding material | CCAW (aluminium) |
| Magnet | 13 oz |
| DIMENSIONS & PACKAGING | |
| Overall diameter | 100 mm (3.9") |
| Depth | 94 mm (3.6") |
| Net weight | 1.15 kg |
| Shipping weight (1 pc) | 1.3 kg |
| Shipping box (1 pc) | 11 × 11 × 10.5 cm |
| Sold as | Pair (2 pieces) |
MANUFACTURER’S LABORATORY DATA · PEAK OR “BURST” FIGURES USED IN SOME MARKETS ARE NOT RMS AND ARE NOT LISTED
Complete the system
Before you install it
- It always needs a crossover. Never full range. A compression driver wired straight to the amplifier does not survive. Use a crossover, or at the very least a capacitor in series.
- Do not cross below 800 Hz. 800 Hz is the lowest frequency this driver is rated for. Going under it, at any power, is the fastest way to tear the diaphragm.
- Do not go below 4 ohm per channel. 4 ohm is the minimum load. Two drivers in parallel on one channel give 2 ohm: most amplifiers will heat up or go into protection.
- Aim it, and set the gain low. A horn is directional, so point it at the listener; then bring the level up slowly. Clipping kills compression drivers far more often than power does.
Questions installers ask
spaudio@spaudio.it · +39 340 807 8778
Accepted payment methods
Visa · Mastercard · Maestro · American Express · PayPal · Apple Pay · Google Pay · Shop Pay · Klarna
SP Audio — Super Power Audio. Designed in Italy by Audiocar Import & Export SRLS, Milano, official SP Audio distributor for Europe.