










SP 6MM NEO Midrange Extreme 6.5" 200W RMS
Free shipping worldwide. Pay in easy, interest-free installments with Klarna.
SUPER POWER AUDIODESIGNED IN ITALY
MMXXVI
200 watt RMS.
Neodymium, no dead weight.
The 2026 neodymium midrange of the EXTREME line: 6.5"/16.5 cm, 98.2 dB, a 38.5 mm (1.5") CCAW voice coil and a solid aluminium phase plug. Same power as the ferrite SP 6MM, in a motor that is a fraction of the size and weight. Unit price.

Power, measured not promised
PER SPEAKER · RMS IS CONTINUOUS POWER, NOT BURST · NOMINAL 4 Ω
Why this midrange
The loudest of the 6.5" family. On the same channel it plays noticeably louder than the ferrite models, before you touch the gain.
The same magnetic force as a big ferrite ring in a much smaller and lighter motor. It fits shallow doors, pods and pillars where a ferrite 6.5" does not.
38.5 mm of copper-clad aluminium winding: light enough to stay fast, big enough to take 200 W RMS without complaining.
A solid aluminium plug in the centre of the cone: it keeps the response clean off-axis and pulls heat away from the voice coil.
Look at it closely
Full specifications, Thiele-Small parameters and mounting data, straight from the 2026 factory sheet.
⇩ Open the manual (PDF)English · 2026 edition · opens in a new tab
What you receive
The price on this page is for one SP 6MM NEO. For a classic left-and-right front stage, order two — they ship from the same production batch. Packed in the SP Audio box with the protective foam.
In the box: 1 × SP 6MM NEO midrange · mounting screws · SP Audio packaging.
Not included: grilles, speaker cable, crossovers and adapter rings — installation materials, chosen for your car.

Technical specifications
| POWER & LOAD | |
|---|---|
| Rated power (RMS) | 200 W |
| Peak power (MAX) | 400 W |
| Rated impedance | 4 ohm |
| ACOUSTIC | |
| Nominal diameter | 165 mm (6.5") |
| Sensitivity | 98.2 dB SPL 1W/1M |
| Frequency range | 80 Hz - 10 kHz |
| MOTOR & MATERIALS | |
| Voice coil diameter | 38.5 mm / 1.5" CCAW |
| Winding material | Copper clad aluminium wire (CCAW) |
| Magnet | Neodymium |
| Phase plug | Aluminium, solid |
| Suspension | M-ROLL, polycotton |
| Cone | Fiberglass reinforced paper |
| Sold as | Unit (1 piece) |
| THIELE-SMALL PARAMETERS | |
| Fs | 170 Hz |
| Re | 3.0 ohm |
| Qts | 0.826 |
| Qes | 0.884 |
| Qms | 12.440 |
| Vas | 1.427 L |
| Xmax | 2.0 mm |
| Sd | 132 cm² |
| Bl | 7.356 TM |
| η0 | 1.014 % |
MANUFACTURER’S LABORATORY DATA · PEAK OR “BURST” FIGURES USED IN SOME MARKETS ARE NOT RMS AND ARE NOT LISTED
Complete the system
Before you install it
- Do not go below 4 ohm per channel. Two speakers in parallel on one channel give 2 ohm: most amplifiers will heat up or go into protection.
- Use a high-pass filter. This is a midrange, not a woofer: cut below 80 Hz and let the subwoofer do the bass. Feeding it low notes is the fastest way to damage it.
- Set the gain properly. Clipping kills voice coils far more often than power does.
- Plan the top end. It runs to 10 kHz: pair it with a tweeter for the last octaves, crossed where the tweeter allows.
Questions installers ask
spaudio@spaudio.it · +39 340 807 8778
Accepted payment methods
Visa · Mastercard · Maestro · American Express · PayPal · Apple Pay · Google Pay · Shop Pay · Klarna
SP Audio — Super Power Audio. Designed in Italy by Audiocar Import & Export SRLS, Milano, official SP Audio distributor for Europe.

