SP 6MM Midrange Extreme 6.5" 200W RMS 2025 (Pair)

Sale price€141,00 Regular price€282,00
Save €141,00
5.0
✅
ReadyShips in 24/48 h from Italy

Free shipping worldwide. Pay in easy, interest-free installments with Klarna.


SP Audio - Super Power AudioSUPER POWER AUDIO
DESIGNED IN ITALY
MMXXVI
midrange extreme · ferrite · 6.5 inch · new model 2025

200 watt RMS.
The extreme 6.5".

The MIDRANGE EXTREME line in the standard 6.5"/16.5 cm size: 98.1 dB, a 40 Oz ferrite motor, a 38.5 mm (1.5") CCAW voice coil and a solid aluminium phase plug. Twice the power of the best seller, in the same hole. Sold as a pair.

SP 6MM 6.5 inch midrange extreme held in two hands: orange basket, aluminium phase plug

200WRMS · 4 Ω
400WMAX · PEAK
98.1dBSPL 1W/1M
🔒 Secure checkout · SSL & PCI DSS↩ 14 days to change your mind (EU)✓ Invoice from an Italian company✓ Data from the 2026 factory manual
✓ ITALIAN DESIGN✓ 4 OHM✓ PAIR PRICE✓ FREE SUPPORT✓ FULL THIELE-SMALL
01

Power, measured not promised

RMS · 4 Ω
200 W
MAX · PEAK
400 W

PER SPEAKER · RMS IS CONTINUOUS POWER, NOT BURST · NOMINAL 4 Ω

02

Why this midrange

98.1 dB: extreme sensitivity

Two decibels over the best seller means the same amplifier plays almost twice as loud. This is the 6.5" for SPL builds on a 4-channel amp.

A 1.5" CCAW coil for 200 W

38.5 mm of copper-clad aluminium winding: light enough to stay fast, big enough to take 200 W RMS without complaining.

The phase plug instead of the dust cap

A solid aluminium plug in the centre of the cone: it keeps the response clean off-axis and pulls heat away from the voice coil.

It goes in the standard 6.5" hole

165 mm nominal, 4 ohm, M-ROLL polycotton surround: extreme output without touching the door sheet metal.

“Continuous RMS only. No peak, no burst, no marketing watts.”
03

Look at it closely

SP 6MM front view in hand: cone, M-ROLL surround and aluminium phase plug
01 · the coneFiberglass reinforced paper, M-ROLL polycotton surround, solid aluminium phase plug in the centre.
SP 6MM pair in a glass display case: ferrite motor from the back and cone from the front
02 · the motor40 Oz ferrite magnet, 38.5 mm CCAW voice coil, copper-clad aluminium wire.
Free shippingDispatched from Italy in 24–48 working hoursWarranty on manufacturing defectsFree technical support from Italy
FACTORY MANUAL & SPECIFICATION SHEET

Full specifications, Thiele-Small parameters and mounting data, straight from the 2026 factory sheet.

⇩ Open the manual (PDF)

English · 2026 edition · opens in a new tab

04

What you receive

Two speakers, not one.

The price on this page is for a pair: left and right, from the same production batch, so the two sides of the car are matched. Packed in the SP Audio box with the protective foam.

In the box: 2 × SP 6MM midrange · mounting screws · SP Audio packaging.
Not included: grilles, speaker cable, crossovers and adapter rings — installation materials, chosen for your car.

SP 6MM midrange pair with the open SP Audio box and foam insert
05

Technical specifications

POWER & LOAD
Rated power (RMS) 200 W
Peak power (MAX) 400 W
Rated impedance 4 ohm
ACOUSTIC
Nominal diameter 165 mm (6.5")
Sensitivity 98.1 dB SPL 1W/1M
Frequency range 80 Hz - 10 kHz
MOTOR & MATERIALS
Voice coil diameter 38.5 mm / 1.5" CCAW
Winding material Copper clad aluminium wire (CCAW)
Magnet 40 Oz ferrite
Phase plug Aluminium, solid
Suspension M-ROLL, polycotton
Cone Fiberglass reinforced paper
Sold as Pair (2 pieces)
THIELE-SMALL PARAMETERS
Fs 150 Hz
Re 3.0 ohm
Qts 0.729
Qes 0.791
Qms 9.316
Vas 2.89 L
Xmax 2.0 mm
Sd 224 cm²
Cms 85.98 µm/N
Mms 11.107 g
Bl 7.51 TM
η0 1.52 %

MANUFACTURER’S LABORATORY DATA · PEAK OR “BURST” FIGURES USED IN SOME MARKETS ARE NOT RMS AND ARE NOT LISTED

06

Complete the system

07

Before you install it

  • Do not go below 4 ohm per channel. Two speakers in parallel on one channel give 2 ohm: most amplifiers will heat up or go into protection.
  • Use a high-pass filter. This is a midrange, not a woofer: cut below 80 Hz and let the subwoofer do the bass. Feeding it low notes is the fastest way to damage it.
  • Set the gain properly. Clipping kills voice coils far more often than power does.
  • Plan the top end. It runs to 10 kHz: pair it with a tweeter for the last octaves, crossed where the tweeter allows.
08

Questions installers ask

How much power does the SP 6MM handle?200 W RMS continuous and 400 W peak, per speaker. The price on this page is for a pair.
What amplifier does it need?4 ohm nominal: an amplifier able to deliver about 200 W RMS at 4 ohm on each channel is the right match.
Will it fit in my door?It is a standard 6.5" / 165 mm frame. In most cars it replaces the factory speaker directly; some need an adapter ring.
What is the difference with the SP 6MM NEO?Same size, same 38.5 mm CCAW voice coil, same 200 W RMS. The NEO uses a neodymium magnet, so the motor is much smaller and lighter; this one uses a 40 Oz ferrite magnet.
What is the cone made of?Fiberglass reinforced paper: light and rigid, so it keeps its shape at high volume.
Free technical support from Italy. Write or call and a person answers, with the real data of the product sheets. Tell us what you want to build — power, crossover points, door or kick panel — and we will help you match it.
spaudio@spaudio.it · +39 340 807 8778

Accepted payment methods
Visa · Mastercard · Maestro · American Express · PayPal · Apple Pay · Google Pay · Shop Pay · Klarna

SP Audio — Super Power Audio. Designed in Italy by Audiocar Import & Export SRLS, Milano, official SP Audio distributor for Europe.